Quick Start Guide; Install Micro Sd Card; Power-On/Off - IVIEW 360 Pro Quick Start Manual

Quick Start Guide

1. Install Micro SD card:

Insert the Micro SD card into the slot as indicated, as shown on the right.
Important:
・A branded high-speed 8GB Micro SD
card between Class 6~Class 10 is
recommended; otherwise, this product
may not work normally.
・Make sure to format the Micro SD card
before placing it in the device. Do not
use the Micro SD card to store other
devices' files.
・Please turn off the camera before you
insert or remove the Micro SD card.

2. Power-on/off

Power-on: Press and hold Power button for about 2 seconds and release,
until it beeps. The display screen will light up, as shown below, indicating
the product is ready for use (photo-shooting mode is loaded on startup by
default).
Important:
・If power-on fails, charge the camera first, and see whether the blue
indicator lights up during charging. If yes, it indicates the product is
being charged.
Power-save mode: If the device is idle, the system will enter power-save
mode after 1 minute. The display will automatically turn off. The camera
can be reactivated by pressing any button.
IVIEW
- 2 -
Micro
SD Card