Advertisement
coNNEctiNg to tHE iNtERNEt
www
First of all, you need to configure a WiFi network. For this procedure to work, you need to be in a WiFi zone that will allow
you to connect to it. Every time the ARCHOS is in range of a network that you have already configured once, it will at-
tempt to make a connection.
To configure a new WiFi network, go on the Home screen, tap on the Application tab
1
settings
.
2
settings
In the
screen, select
3
If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi settings. The ARCHOS will
scan for available WiFi networks and display them.
Tap on the network you want to connect to, enter the required network information* and then tap on
4
now attempt to establish a connection to that WiFi hot spot with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters)
of the type WEP, WPA, or WPA2. Refer to your WiFi provider to obtain the exact connection parameters required.
6
Archos_70b_eReader_EN_pn109235.indd 6
Wireless & networks
.
, then select
Connect
. Your ARCHOS will
16/11/2010 15:57:33
Advertisement
