Summary of Contents for Vaillant MAG HK 13-2/0-3 H
Page 1
MAG HK 17‑2/0‑3 H (back flue) MAG HK 17‑2/0‑3 B (back flue) MAG HK 13‑2/0‑3 H (top flue) MAG HK 13‑2/0‑3 B (top flue) HKen Publisher/manufacturer Vaillant GmbH Berghauser Str. 40 D-42859 Remscheid Telefon 021 91 18‑0 Telefax 021 91 18‑28 10 info@vaillant.de...
Safety 1 Safety The products are gas-fired instantaneous Action-related warnings water heaters and, as such, are intended for Classification of action-related warnings hot water generation. The action-related warnings are classified in Intended use includes the following: accordance with the severity of the possible –...
Page 4
1 Safety Open all accessible doors and windows fully Do not damage or remove any seals on to provide ventilation. components. Switch off the product. Do not make any changes: – The product itself Inform a Registered Gas Contractor. – to the gas, air, water and electricity sup- 1.3.5 Risk of death from escaping gas plies What to do if you smell gas in the building:...
These instructions apply only to: (back flue) max. 37 kW Product – Article numbers MAG HK 17-2/0-3 B (back flue) MAG HK 13-2/0-3 H (back flue) 0010017391 MAG HK 17-2/0-3 H (back flue) 0010017392 Product design MAG HK 13-2/0-3 B (back flue)
3 Product description Display operator control elements Control elements for further remote controls (optional) °C °C L/min Button for selecting the button (on/off but- priority for a remote ton) control button button for selecting button Recommended hot water temperature the operating mode button (on/off but- (press briefly) / button settings...
Operation 4 Starting up the product Conditions : 13 L products Only start up the product once the casing has been com- The water flow can assume various values: 6, 7, 8, 9, pletely closed. 10 L/min. Switching on the product Conditions : 17 L products The water flow can assume various values: 6, 7, 8, 9, 10, 11, Press...
5 Detecting and rectifying faults Detecting and rectifying faults Stopping ECO mode Press to select other mode during standby status ; or Remote control get the priority (if applicable) Setting the bath-filling mode To switch from normal operating mode to bath-filling mode while in standby, press twice.
Customer service For contact details for our authorised customer service de- partment, you can write to the address that is provided on the back page, or you can visit www.vaillant.com. 0020208984_00 turboMAG pro Operating instructions...
Appendix Appendix Detecting and rectifying faults Problem Possible cause Solution Opening and closing the water tap several times Ignition malfunction Air in the gas line ( Please ensure there is a momentary pause in between each water tap opening and closing) Automatic shutdown of the Safety device has switched on Closing the water tap for a short time...
Page 12
0020208984_00 21.04.2015 These instructions, or parts thereof, are protected by copyright and may be reproduced or distributed only with the manufacturer's written consent.