Definitive Technology SoloCinemo XTR Quick Reference Manual page 30

SSA IMMERSION
6. SOURCE 4 INPUT: The fourth source input accommodates either analog RCA inputs, or
Toslink Digital inputs. By default, the system auto-detects between the digital Toslink
and RCA inputs. If a digital Toslink signal is present, it will be used. Alternatively, you
can select either digital or analog to lock onto one input.
SOURCE 4 INPUT
7. HDMI AUDIO: This menu option controls whether or not audio is sent to the TV via
HDMI. The factory preset is NORMAL. The DEMO feature routs audio to the TV set via
the HDMI output. In normal operation, audio is not sent to the TV. A consumer would
rarely, if ever, need to use this feature. It is intended to allow comparisons between the
audio that is reproduced by the bar, and the same audio through the TV speakers.
HDMI AUDIO
8. SYSTEM: Selecting the RESTORE DEFAULTS option restores all system settings to
their original factory default settings. It may be useful in trouble shooting system issues.
FIRMWARE: One addition item appears. There is a sub-menu, under the system bar,
which notes which version of the firmware is installed in your system, e.g: FIRMWARE
R0150. If you have an issue with your system, please have this firmware version
number handy prior to contacting our customer service department. They will need this
information to be able to help you.
Note: Please register your SoloCinema XTR at
so that we can alert you in the event of firmware upgrades.
SYSTEM
www.DefinitiveTech.com/Register/
RESTORE DEFAULTS
MOVIE MODE
MUSIC MODE
AUTO
DIGITAL
ANALOG
DEMO
NORMAL
20