Definitive Technology SoloCinemo XTR Quick Reference Manual page 28

IR REPEATER
3. IR LEARN: IR Learn is used to program SoloCinema XTR to respond to other remote
controls: for example, your cable box or TV's remote IR commands. You can teach our
bar to respond to the following IR commands from other remote controls:
o POWER
o VOLUME Up and Down
o MUTE
o INPUT SOURCE commands (up to four inputs). The On-Screen display is used
to teach the remote commands to SoloCinema XTR (see example below):
To learn your TV remote's Volume UP command: with the SoloCinema XTR powered on,
1. Press the SoloCinema XTR remote control MENU button to open the OSD
2. Scroll down to the third menu box: IR Learn
3. Click right arrow on the XTR remote cursor wheel, and VOLUME UP Illuminates
4. Press the XTR remote ENTER key. Note: You will see the words "PRESS & HOLD
KEY" displayed on the On-Screen Display.
5. Pick up the remote you wish to have the SoloCinema XTR learn – for example, the TV
remote. Press and hold the Volume Up key
6. The words "PRESS & HOLD KEY" now change to say "RELEASE". Release the TV's
volume up key and the On-Screen Display again prompts you to "PRESS & HOLD KEY".
7. The On-Screen Display will prompt you to PRESS & HOLD KEY three times. The word
"DONE" then appears on the lower right hand corner of the On-Screen Display.
8. The OSD automatically navigates to STORE once the 3 press-and-release prompts
have been completed.
9. Press the ENTER key while STORE is illuminated. The menu now reverts back to
highlighting the IR LEARN function.
ON
OFF
18