Installing LTE outdoor CPE
Selecting a Location: LTE Outdoor CPE should be pole-mounted
●
outdoors and aligned so its antenna faces the nearest LTE eNB.
When selecting a suitable location for the unit, consider these
guidelines:
Place LTE Outdoor CPE as high as possible to achieve the best
•
possible link quality.
Place the LTE Outdoor CPE away from power and telephone
•
lines.
Avoid placing LTE Outdoor CPE too close to any metallic
•
reflective surfaces.
Be sure to ground LTE Outdoor CPE with an appropriate
•
grounding wire (not included) by attaching it to the grounding
screw on the unit and to a good ground connection.
Mounting the ODU: Mount LTE Outdoor CPE on a 1"-4" pole
●
using the supplied kit, or the optional tilt accessory.
Using the clamp
•
1. Thread the M10*100mm bolt through a spring washer, flat
washer and the bracket holes.
2. With the connector facing downward, attaché LTE Outdoor
CPE to a 1"-4" pole.
3. Attach the bracket to the other side of the pole.
4. Thread the M10*100mm bolts through both holes on either
side, and tighten the nuts.