Table of Contents
Advertisement
VRZ364/VRZ344
4/7/99 8:10 PM
36 Timer Recording With the VCR Plus+ Programming System (cont'd)
5
Press the FF :/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set
in step 4. Complete steps 6 - 7 on page 34.
6
• If you want to record the program one time only, go to
step 7. You may also press the Number 8/DAILY or 9/WEEK-
LY button repeatedly to select a ONE TIME PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button. The VCR will record a program
every day from Monday through Friday, starting at the same
time and recording for the same length of time.
• If you want to record the program every week, press
the Number 9/WEEKLY button. The VCR will record a
program on the same day, at the same time, for the same length
of time every week.
DAILY PROGRAM (MON-FRI)
PROGRAM
1
CHANNEL +/– 12
START +/–
08:00 PM
STOP +/–
10:00 PM
REC SPEED
SP
DATE +/–
07/31/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
7
Press the SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-
screen display will disappear.
9
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place.
r
The
light will appear on the display panel. The
Cassette-Inside light will flash when you turn off the VCR if there
is not a tape in the VCR.
The VCR must be off for a timer
recording to take place!
Make sure a tape is in the VCR.
Page 36
r
light and the
CBL/DBS
TV
VCR
VCR/TV
EJECT
POWER
c
QUICK PROGRAMMING
1
+
2
+
3
START
STOP
DATE
4
–
5
–
6
DBS
DAILY
WEEKLY
7
8
9
7
0
SPEED
CLEAR
STILL/SLOW
–
+
REW
FF
PLAY :
;;
::
/OK
STOP L
VOL
CH
MENU
EXIT/STATUS
TIMER
7;;INDEX ::7 AUDIO/MUTE
SKIP
JOG/SHTL
REC
/OTR
J
REV 2
3 FWD
Helpful Hints
• Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday. The recording
will not occur, even though the VCR
may accept the way you pro-
grammed the recording.
• To exit the VCR Plus+ programming
system at any step, press the
EXIT/STATUS button.
• PROGRAM NOT COMPLETED/
CLASH may appear on-screen for
five seconds at step 8 if the timer
recording you programmed overlaps
with another timer recording. To
cancel the overlapping timer record-
ing, follow the steps on page 40.
9
6
5
8
Advertisement
Table of Contents
