Table Of Contents - SBS -H2 Installation, Operating, & Maintenance Instructions

Hydrogen gas detector kit
Table of Contents

Advertisement

Table of Contents:

Description
LED Trouble Shooting Chart
Part Numbers & Options:
Part No.
Description
SBS-H2
Hydrogen Gas Detector (Includes: Main Unit, (1) sensor & (1) 25ft cable)
Junction Box, 4 11/16" X 4 11/16" Metal, with Knockouts
H2-JB
H2-SENSOR
Additional/Replacement Hydrogen Gas Sensor with 25ft Cable
H2-100FT-CABLE
Custom 100 Ft Cable and mA Converter (no sensor)
H2-CALKIT
Field Calibration Kit for SBS-H2
E190399
110vac 3 Prong AC Cord, 10 Ft, 18AWG
Warnings:
This detector is added protection, not a substitute, for prudent safety measures where
hydrogen gas is present. For large or highly sensitive areas, you may have to use two or
more detectors with 1 or 2 sensors each for increased detection.
The hydrogen sensor does not provide protection from fires or hydrogen explosions.
The relay contacts are intended to be connected to a safety system, enabling audible
alarms, system shutdown, ventilation, or other measures to ensure safe handling and
use of hydrogen gas.
Ensure that your installation complies completely with all relevant local, State, Federal,
and OSHA safety and health regulations
If sensor responds, there is a risk of combustion or explosion. To avoid injury leave area
immediately.
The hydrogen sensor is calibrated for operation in air. Tampering with the sensor or
operation in other gas environments can lead to inaccurate readings and possible
permanent damage if operating in a reducing atmosphere or 100% hydrogen. The
hydrogen sensor is silicone resistant but uncured silicone compounds or extended
exposure to silicone off gassing, or high concentrations of refrigerant gasses related to a
leak, can give inaccurate readings in the sensor.
SBS-H2 Users Manual
Pre-March 2016 Version
Page
3
3
3
4
4
5
6
10
10
10
11
2
Rev 1.4
Section
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
January 6
th
2013

Advertisement

Table of Contents
loading

Table of Contents