Philips VRX463 Owner's Manual page 39

Setting Up the VCR Plus+ Programming System (cont'd) 39
2
Now, compare the channel numbers you have written into the
VCR PLUS+ CH. and CABLE/TV CH. columns. You'll notice that
some stations have VCR Plus+ and Cable/TV channel numbers
that are the same, and other stations have channel numbers that
do not match. Where the channel numbers DO NOT match, you
must tell the VCR the VCR Plus+ and Cable/TV channel numbers
according to the following steps.
3
Press the VCR button, then press the MENU button.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
6 SET REMOTE LOCATOR
TO END PUSH EXIT
4
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 SET REPEAT PLAY (OFF)
2 ON SCREEN MODE
3 LANGUAGE
4 SET VCR PLUS+ CH
5 SET CABLE BOX
6 SET DSS RECEIVER
7 AUDIO OUT
8 VIDEO STABILIZER (OFF)
TO END PUSH EXIT
5
Press the Number 4 button to select SET VCR PLUS+ CH.
6
Look at the columns you filled in on page 38. For stations
whose VCR Plus+ and Cable/TV channels are not the
same, use the CHANNEL Up/Down buttons to place the
arrow beside the VCR PLUS+ channel. Then, press two
Number buttons to enter the CABLE/TV channel. Entries
must be made within one minute. If you enter the CABLE/TV
channel incorrectly, you may enter it again.
Do this until you have entered all the channels on your list.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
98 98
99 99
– – – – – >
01 33
02 02
TO SELECT CH PUSH CH UP/
DOWN, THEN ENTER CH. NO.
TO END PUSH EXIT
7
Press the EXIT/STATUS button to exit.
2 Examine the lists on
page 38.
CBL/DSS VCR
POWER
PAUSE/STILL
PLAY
REW
EJECT
STOP
VCR PLUS+/ENTER
7
EXIT/STATUS
MENU
JOG/SHUTTLE
4
1 2
5
4 5
7 8
100 0
GO-TO
REC /OTR
INDEX
VAR.
SLOW
SPEED VCR/TV SLOW TRACKING
REMOTE LOCATOR
Helpful Hints
• To check the VCR PLUS+ and
CABLE/TV channel listings, follow
steps 3 - 5 above. A list of VCR
PLUS+ and CABLE/TV channel num-
bers will appear on-screen. To
move through the list, press the
CHANNEL Up/Down buttons. Make
sure these numbers match your lists
on page 38. Press the EXIT/STA-
TUS button to exit.
• When you receive the VCR from the
factory, all the VCR Plus+ channel
numbers and Cable/TV channel
numbers are the same in the cross
reference map.
3
TV
MUTE
FF
F.ADV
CLEAR
6
3
6
9
MEMO
SKIP
SEARCH