Operating The Appliance - Bosch MSM64120 GB Operating Instructions Manual

MSM64120_GB_Zub_ms-zh-en-ar.book Seite 8 Dienstag, 30. September 2014 10:44 10
en
Place the attachment on the universal

cutter and rotate in a clockwise direction
until it "clicks" into position.
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

Hold the base unit and universal cutter

firmly and switch on the appliance
(Turbo speed).
Release the On button after processing.

After using the appliance
Remove mains plug.

Press the release buttons and remove

the base unit from the attachment.
Rotate the attachment in an anti-

clockwise direction and remove from
the universal cutter.
Take hold of the blade by the plastic

handle and take out.
Place the lid on the universal cutter

to keep in the processed ingredients.
Cleaning
Attention!
Never immerse the attachment of the
universal cutter in liquids and do not clean
under flowing water or in the dishwasher.
Universal cutter and blade are

dishwasher-proof.
Wipe the attachment with a damp

cloth only.
Whisk
Please fold out the illustrated pages.
Fig. 
6 Gear attachment
7 Whisk
A whisk can be ordered from customer
service (order no. 657379).

Operating the appliance

The whisk is suitable for whipping cream,
beating egg whites and milk froth (from hot
(max. 70 °C) and cold milk (max. 8 °C)) as
well as for preparing sauces and desserts.
oáëâ=çÑ=ëÅ~äÇáåÖ>
When processing hot milk, use a tall, narrow
blending receptacle. Hot milk may splash and
scald you.
8
Fig. 
Put ingredients into the blender jug.

Place the gear attachment on the base

unit and lock into position.
Insert the whisk into the gear attachment

and lock into position.
Attention!
Never insert the whisk into the base unit
without the gear attachment (Fig.=  -3).
Set required speed using the speed

control (recommendation: high speed).
Grip base unit and blender jug and press

required On button.
Release the On button after processing.

After using the appliance
Remove mains plug.

Press the release buttons and remove

the base unit from the gear attachment.
Remove the whisk from the gear attach-

ment.
Cleaning
Attention!
Never immerse the gear attachment in liquids
and do not clean under flowing water or in the
dishwasher.
The whisk can be cleaned in the dish-

washer.
Wipe the gear attachment with a damp

cloth only.
Robert Bosch Hausgeräte GmbH
Subject to alterations.