Hookups With A Stereo Tv - Philips VRA231AT Owner's Manual

10 Hookups With a Stereo TV

VIDEO (yellow) and
AUDIO (white) OUT Jacks
Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack
on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on
the back of the VCR. Then, connect the other end of the
video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the white AUDIO OUT Jack
on the back of the VCR. Then, connect the other end of
the audio cable to the AUDIO IN Jack on your TV.
(If your TV has Right and Left AUDIO IN Jacks, you must use a
"Y" splitter audio cable as illustrated to deliver audio to the TV's
right and left channels.)
4
Turn on your TV, making sure it is in Line Input mode. Please
refer to your TV owner's manual for details.
1
antenna or
cable to
ANT(enna)
IN Jack
ANT
IN
AUDIO
IN
OUT
OUT
CH3 CH4
VIDEO
2
Video Cable
3
Audio Cable
Audio and Video
IN Jacks on TV
Helpful Hint
• This hookup will not give you stereo
sound. To get stereo sound, use the
connections on pages six - seven
and select the channel to be viewed
at the TV (with the VCR turned off).