Table of Contents
Advertisement
12 Automatic Channel Setup
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up the channels again.
1
Press the VCR button.
2
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
AUTO PROGRAMMING, then press the F.FWD/B but-
ton. The VCR distinguishes between TV channels and cable chan-
nels, and the VCR will place all the channels you receive into its
memory.
5
Wait for a few minutes while the VCR sets up the chan-
nels. When this is complete, CHANNELS ARE SET will appear
on-screen. Then the programming of the lowest channel number
placed in the VCR's memory will appear on-screen. Now when
you press the CH(annel) o/p button, you will scan only through
channels you receive.
POWER
VCR/TV
EJECT
1
TV
PLAY
REW
F.FWD
STOP
2
STATUS/EXIT
1
2
3
4
5
6
7
8
9
ALT. CH
0
SPEED
PAUSE/STILL
REC/OTR
MEMORY
Helpful Hints
• You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 00). When
you select channel 00, A/V IN will
appear on-screen briefly.
• You can not program channels if
you are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have a
cable connection, channels 1-125
will be available.
3-4
CH
VOL
MUTE
Advertisement
Table of Contents
