Table of Contents
Advertisement
To end, press the
MENU
Automatic recording from a satellite
receiver (SAT RECORDING)
You can only use this function when you have a satellite
receiver which can control other equipment by a
'programming' function.
Switch on the TV set and select the programme number
for the video recorder.
Press the
button. The main menu will appear.
MENU
Select the line 'RECORD FUNCTIONS' with the menu
buttons
P =
or
P ;
, and confirm with the
button.
P
Select the line 'RECORD SETTINGS' with the menu
buttons
P =
or
P ;
, and confirm with the
P
button.
Select the line 'SAT RECORD' with the menu buttons
P =
or
P ;
.
Select the scart socket you want to use with the menu
buttons
Q
or
P
.
If you want to switch off the function, select 'OFF' with
the menu buttons
P
or
Confirm with the
button.
OK
Use a scart cable to connect the scart socket you have
selected on the video recorder to the scart socket on the
satellite receiver.
Put a cassette into the machine.
To end, press the
mSTANDBY
is now ready to record.
D When this function is switched on, '
video recorder display.
button.
Q
.
button. The video recorder
x
' appears on the
Direct record
When this function is switched on and the video recorder is
switched to standby, the video recorder will automatically
record the programme number selected on the television.
D If you are following the instructions on page 2 under
'Connecting with a scart cable and Easy Link or
NexTView', the video recorder will also take the
programme number from the TV set automatically when
the video recorder is switched on.
Switch on the TV set and select the programme number
for the video recorder.
Press the
button. The main menu will appear.
MENU
Select the line 'RECORD FUNCTIONS' with the menu
buttons
P =
or
P ;
, and confirm with the
button.
P
Select the line 'RECORD SETTINGS' with the menu
buttons
P =
or
P ;
, and confirm with the
P
button.
Select the line 'DIRECT RECORD' with the menu buttons
P =
or
P ;
.
Select the function 'ON' with the menu buttons
.
P
Confirm with the
button.
OK
To end, press the
MENU
Switch off the video recorder with the
button.
mSTANDBY
On the TV set, select the programme number you want to
record from.
Press the
nRECORD/OTR
switched off.
D Don't select another programme number on your TV set
until the 'search symbol' on your video recorder display
disappears. This can take up to one minute.
D If 'NOTV' appears on the video recorder display, this
means the video recorder cannot find that channel. The
video recorder will then switch off automatically.
Q
or
button.
button with the video recorder
11
Advertisement
Table of Contents
