Changing Measurement Units; Language Setup; Long Pid Names - Bosch OBD 2220 INFO SCAN User Manual

Diagnostic Menu
Diagnostic Monitor Tests
On-Board Systems
Charging System Monitor
Vehicle Information
Component Locator
Acronyms
Review Data
Code Lookup
System Setup
Rd\Er

Changing Measurement Units

English is the default measurement unit. Measurement
units can be changed in View and Record Data.
From System Setup screen:
1. Select English/Metric.
• Use the and
is highlighted.
• Press .
System Setup
English/Metric

Language Setup

Long PID Names

Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
2. Select desired measurement unit.
• Use the and
is highlighted.
• Press .
Measurement Units
English
Metric
3. Save measurement setting.
• Press .
Bosch Automotive Service Solutions Inc.
keys until English/Metric
keys until the desired unit
OBD 2220 Info Scan | User guide | 11 | en
Language Setup
Language Setup selection allows the user to change the
language used by the Tool. English is the default lan-
guage.
From System Setup screen:
1. Select Language Setup.
• Use the and
is highlighted.
• Press .
System Setup
English/Metric
Language Setup
Long PID Names
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
2. Select desired measurement unit.
• Use the and
language is highlighted.
• Press .
Language Setup
English
Español
Francais
3. Save language setting.
• Press .
NOTE: When Spanish or French translation is not known,
English will be shown.
Long PID Names
Long PID Names allows the user to enable/disable the tool
scrolling the complete PID name on the bottom line of the
display while viewing Live Data or viewing Freeze Data.
From System Setup screen:
1. Select Long PID Names.
• Use the and
Names is highlighted.
keys until Language Setup
keys until the desired
keys until Long PID
580000 | REV. A | 04.2017