Advertisement
carpet with exceptionally long, soft pile the safety switch may prevent the heater
from turning on. Should this happen replace the heater on a firmer, smoother,
surface.
1、Handle
2、Thermostat button
3、Switch
4、Indicator light
5、Air outlet
6、Body
7、Base
8、Tip over switch
9、OSC
Protective System
1. To avoid risk to human being or damage to internal components, the ceramic
heater has a security system which will automatically switch off the appliance
if the heat reaches the safety limit. If overheating occurs:
1.1 Turn the heat select switch to "O" position, turn the thermostat switch to the
minimal position and remove the plug from the socket.
1.2 Check if the air flows smoothly before the outlet and inlet, and if the appliance
is put in right position. If so, get it in order before restarting the appliance.
1.3 Let the ceramic heater cool down for at least 10 minutes before you start it
again.
1.4 Plug in the appliance and switch it on. If the appliance cannot operate
normally, remove the plug immediately from the socket and have the ceramic
heater serviced by an appointed service only.
Maintenance and Cleaning
1. Before you turn off the appliance, turn the heat select switch to the " "position.
After operating for 3 to 5 minutes to lower the internal temperature of the
appliance, then turn the heat select switch to "O" position.
5
Advertisement
