Advertisement
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISEET Pot JSSER
JUSQU'AU FOND.
SAVE THESE INSTRUCTIONS
Operation instructions
1. Turn the thermostat switch to the minimal value, at the same time turn the
heat select switch to the "O" position.
2. Plug in the appliance, and turn the thermostat switch to the maximum position.
Then turn the heat select switch to choose air or warm air and the temperature
of warm air as below. While working the indicator light will be on.
2.1 Turn the heat select switch to "
2.2 Turn the heat select switch to "I" position, the heater blows warm air, working
at Low.
2.3 Turn the heat select switch to "II" position, the heater blows warm air, working
at High.
2.4 Turn the heat select switch to "O" position, the heater stops working, the
indicator light will be off.
3. Adjust the thermostat switch to suitable position for desired temperature
setting.
3.1 When you feel the room temperature is comfortable, turn the thermostat
switch counter-clockwise slowly to the minimal position until the appliance stops
working.
3.3 Then the thermostat switch will keep the room temperature at the desired
temperature automatically.
4.
Tip over safety switch is designed to switch the heater off in the event that
it is lifted or falls over. If the heater is placed on a very indented surface or on a
"position, the heater blows cool air.
4
Advertisement
