Table of Contents
Advertisement
Back Panel: Functions
Master Power Switch
EcoLantern has a separate
Master Power Switch and two
Standby Power Buttons. The
switch MUST be set to the
ON position to power your
EcoLantern. Once the switch
is set to ON, use the Standby
Buttons
on the front panel to turn the
speaker or the light On/Off.
NOTE: When not in use for
extended periods, turn the
Master Power off to preserve
battery life.
IMPORTANT: Standby Power
function will NOT operate when
the Master Power is set to OFF.
Audio AUX-IN
Connect an audio device using
the 3.5mm cable connection
as an alternative to a Bluetooth
connection to your EcoLantern.
NOTE: Volume level must be
controlled from the audio
device when connected to the
AUX-IN connection.
Input
Connect the USB cable to the
USB micro Input to charge
your EcoLantern.
RECOMMENDATION: Use the
USB cable and power adapter
included in the box.
/
located
NOTE: Charge time from low
to full charge is approximately
3 hours.
While playing audio or using
the light, EcoLantern can be
charged or charge your device.
Battery play time shall be
reduced depending on the
time and size of the device
charging while connected to
your EcoLantern.
CAUTION: Do NOT charge if
unit and/or connections are
wet or damp.
Output
Connect to the USB Output
(5V, 2.1A) port to charge your
personal device. Use the
USB cable included with your
personal device.
Charge time is approximately
1-2 hrs. from low to full for most
Smartphones; however, charge
times will vary depending on
the device being charged, the
device's battery specifications,
and the device features.
In some instances your
personal device may not
indicate if charge is in process.
CAUTION: Do NOT charge if
unit and/or connections are
wet or damp.
Advertisement
Table of Contents
