PASSPORT SIGNALING
Selective Call and Call Alert are available
using the PassPort protocol. As such, no third
party can hear the conversation of two users
engaged in a Selective Call. Selective Call and
Call Alert are mutually exclusive. If one of the
users is engaged in a Selective Call or Call
Alert while roaming to a different site, the
Selective Call or Call Alert will end.
SELECTIVE CALL
You can initiate a Selective Call to a particular
radio in three different ways:
• Using a preprogrammed button.
• Through the menu.
• Using the One-Touch button.
Sending a Selective Call using the
Preprogrammed Button
• Press the preprogrammed Selective Call
button (see page 19). Proceed to Step 4.
–or–
Sending a Selective Call through the Menu
)
1
to enter menu mode.
+
?
2
or
until
)
3
to select
• The LED indicator lights a steady yellow.
F
• The display shows
grammed Alias or ID of the last active
Selective Call is displayed.
4 If the unit has not
been engaged in a
Selective Call after
power-up, you see:
+
?
or
to locate the desired Alias or ID
in the Radio Call List.
6HOHFWLYH &DOO
6HOHFWLYH &DOO
and the prepro-
6HOHFW 8VHU
57
English