Programmes; Washing - Siemens WM14E469BY Operating Instructions Manual

Before washing for the first time
Wash once without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
** If the
display panel, the childproof lock
ditional Start/
is active
nctions Reload
Additional functions and options
buttons
page 5.
All buttons are sensitive and need
only to be touched lightly. If the
buttons are held for longer, the
appliance automatically runs
through the setting options.
lect the temperature ( = cold)
ect the spin speed (*depending on the model) or
n, laundry soaks in the last rinsing water, display panel - - -)
ogramme end after
ogramme sequence displays:
ash, rinse, spin, programme duration or end (-0-)
ildproof lock page 5
en the washing machine door, reload laundry
page 9.
page 7.
page 6.
Measure accordingly:
1
symbol flashes in the
Deactivate, page 5.
Individual settings,
2
Start/Reload
(no final
page 4, 5

Washing

Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: Turn the programme
selector to Empty or select the spin speed.
Press Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models
instructions
Switching off
Turn the programme selector to Off.
End of programme when ...
... Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Choose Rinse.
3
– Press Start/Reload.
Programmes at lower temperatures:
– Choose Spin or Empty.
– Press Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press Start/Reload. The new programme starts from
the beginning.
Reloading laundry, if ...
... Press Start/Reload, both the symbols YES and +
are lit in the display panel. If NO is lit, the washing machine
door cannot be opened.
– Press Start/Reload.
Refer to installation
page 5
4