Quick Start Guide - Ddog YARDMASTER 202S Operating Manual

STEP 1 Power Up
Both the remote transmitter and the receiver collar are shipped with a full charge and
can be used right away.
Remote Transmitter: turn the function dial on the remote transmitter from
(a)
OFF to any other position. Make sure that the LED light is switched on and
turns into a solid green color to indicate that the remote transmitter is ready for
use.
Receiver Collar: press the blue ON/OFF button at the front of the collar and
(b)
wait for the LED indicator light to turn into a solid green light.
STEP 2 Pairing the device
By default, the receiver collar and the remote transmitter have already been paired
prior to shipment. To test whether or not the two devices have been properly paired,
press the toggle button (if required) until the LED light next to the number "1" is
switched on, then press the sound button on the remote transmitter and see whether
the receiver collar responds with an audible tone signal.
If an audible tone signal is detected, it means that the two devices have been
properly paired. Otherwise, please go through the pairing instructions on page 11 of
this operating manual.
STEP 3: Using the collar
The collar should now be ready for use. See pages 10-11 of this operating manual for
an explanation on how to use the various features of the collar.

QUICK START GUIDE

Press
3