Summary of Contents for Ddog YARDMASTER 202S
-
Page 1: Operating Guide
YARDMASTER 202S Training Collar System Operating Guide Please read this entire guide before using this product. -
Page 2: Important Safety Instructions
Important Safety Instructions Warning – failure to follow these warnings and the usage instructions could result in serious injury or death. DO NOT use the static stimulus feature of the collar on dogs with an aggressive temperament. This may cause them to inflict injuries to the dog owner or others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. -
Page 3: Quick Start Guide
QUICK START GUIDE STEP 1 Power Up Both the remote transmitter and the receiver collar are shipped with a full charge and can be used right away. Remote Transmitter: turn the function dial on the remote transmitter from OFF to any other position. Make sure that the LED light is switched on and turns into a solid green color to indicate that the remote transmitter is ready for use. -
Page 4: Table Of Contents
3. Product Diagrams ....................6 4. Technical Specifications .................. 6 5. Features ....................... 7 6. Unboxing the YARDMASTER 202S for the First Time ......7 7. Using the YARDMASTER 202S for the First Time ........7 8. Testing the Static Stimulus Function ............8 9. -
Page 5: How Does The Ddog® Yardmaster 202S Work
® The DDOG YARDMASTER 202S Training Collar System offers a simple and effective way for home users to train their dogs. By pairing a remote transmitter with a receiver collar, a user can control the exact moment when a dog will receive a tone, vibration or static response on the receiver collar. -
Page 6: Product Diagrams
Product Diagrams Remote Transmitter Receiver Collar Technical Specifications Remote Transmitter Weight ：45g Dimensions: 10*4*2cm... -
Page 7: Features
Using the YARDMASTER 202S for the First Time ® When using the DDOG YARDMASTER 202S Training Collar System for the first time, you should make sure that the receiver collar has been properly paired with the remote transmitter. Test for proper pairing To test whether the pairing between the two devices has been properly configured, switch on the receiver collar by pressing the blue “On/Off”... -
Page 8: Testing The Static Stimulus Function
Next, adjust the function dial on the remote transmitter to a position other than OFF and press the toggle button (if required) until the LED light next to the number “1” is switched on to indicate that the remote transmitter will operate at the transmission frequency of the first paired receiver collar (which by default is the receiver collar that is shipped alongside the remote transmitter). -
Page 9: Fitting And Powering On The Collar
Then rotate the function dial to a level higher than 2 (otherwise the light emitted will be too weak to notice) and press the static button on the remote transmitter to trigger a static stimulus on the receiver collar. If the static stimulus function is working properly, the test light will start flashing. -
Page 10: Sound/Tone Function
The plastic collar strap can be removed and replaced with the spare nylon strap that comes with the packaging. See page 13 for detailed instructions on how this is done. Press the blue “On/Off” button at the front of the collar. If a solid green light stays on after momentarily flashing in green and red color, it indicates that the collar is ready for use. -
Page 11: Static Stimulus Function
Press Static Stimulus Function The static stimulus button on the remote transmitter is the trigger for a short static stimulus on the receiver collar. The static stimulus is delivered to your dog via the metal prongs attached to the receiver collar. The strength of the static stimulus is adjustable and can be varied from level 1 to level 8 on the function dial, but no static stimulus will be delivered if the function dial is in the OFF or No Shock mode... -
Page 12: Charging The Receiver Collar And The Remote Transmitter
To begin pairing a receiver collar with a remote transmitter, switch on the remote transmitter and press the toggle button until the LED light for the collar number that you wish to designate for the pairing has been switched on (e.g. if you want the receiver collar to be paired as collar number one, then toggle the remote transmitter until the LED light for “1”... -
Page 13: Replacing The Plastic Collar Strap With The Spare Nylon Strap
charging pin at the side of the remote transmitter. The time to fully charge the remote transmitter is approximately 1.5 - 2 hours, and the indicator light will turn into a solid green to indicate that the battery is fully charged. The remote transmitter should remain operational for approximately 2 to 3 weeks on a full charge (assuming frequent usage). -
Page 14: Frequently Asked Questions
Yes. The 3 different training methods offered by the ® 202S training collar system a safe DDOG YARDMASTER 202S training collar system and humane way to train my are engineered and tested to ensure that they do not dogs? cause any injuries to dogs, but only a sense of... -
Page 15: Terms Of Use And Limitation Of Liability
® The DDOG YARDMASTER 202S training collar system has been designed for use with pets where training is desired. The specific temperament of your pet may not work with this product. We recommend that you DO NOT use this product if your pet is less than 8 lb or under 6 months old.
Need help?
Do you have a question about the YARDMASTER 202S and is the answer not in the manual?
Questions and answers