Maintenance - Westinghouse PT50350 Instruction Manual

MAINTENANCE

WARNING!
Before cleaning or performing any maintenance, power supply shall be discon-
nected from tool.
If the supply cord is damaged, it must be replaced by a specially prepared cord
available through the service organization.
Carbon brushes
The brush and commutator of the tool shall be examined for several months. Their good
contact makes the tool energetically. When the spark around the commutator become
greater the carbon brushes should be changed.
Cleaning
Before cleaning or performing any maintenance, power supply shall be discon-
nected from tool. Compressed dry air blow may be the most effective cleaning method.
Always wear safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean. Do not attempt to clean by
inserting pointed objects through openings.
No chemical agent is allowed to be used in cleaning the power tool.
Protecting the environment
Meaning of crossed –out wheeled dustbin: Do not dispose of electrical appliances as
unsorted municipal waste, use separate collection facilities. Contact you local govern-
ment for information regarding the collection systems available. If electrical appliances
are disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being. When
replacing old appliances with new ones, the retailer is legally obligated to take back your
old appliance for disposals at least free of charge.
ACCESSORIES
• Flange 1+1 pc
• Flange wrench 1pc
• Side handle 1pc
*Depressed disc 6mm - 1/4"
*Cutting disc 3mm - 1/8"
9