Auto Return - Philips SV2000 SVA102 Owner's Manual

30 Auto Return

Follow the steps below to make the VCR rewind to the beginning
of the programs after it has finished all timer recordings. Make
sure:
The VCR is on and is in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
1
Press the MENU button repeatedly until the VCR SET
UP menu appears.
VCR SET UP
AUTO REPEAT
RENTAL
AUTO RETURN
2
Press the PLAY button or the STOP button repeatedly to
select AUTO RETURN.
VCR SET UP
AUTO REPEAT
RENTAL
AUTO RETURN
3
Press the F.FWD button so that [AUTO] appears next to
AUTO RETURN on the screen.
VCR SET UP
AUTO REPEAT
RENTAL
AUTO RETURN [AUTO]
4
Press the COUNTER RESET/EXIT button.
Remember to turn off the VCR before the timer recording. When
all the timer recordings are completed, the TIMER light will flash
and the VCR will rewind the tape to the beginning of the record-
ed programs.
POWER VCR/TV
1 2 3
4 5 6
7 8 9
1
0 +100
RENTAL AUTO
SPEED
SELECTOR REPEAT
MENU DISPLAY EXIT
RESET
REWIND / PLAY
RECORD / STOP
2
Helpful Hints
• If additional timer recordings are
programmed to take place later,
the Auto Return function will not
operate until all the programs are
recorded.
• To cancel this function, follow steps
1-2 above. At step 3, press the
F.FWD button so that [AUTO] no
longer appears beside AUTO
RETURN. Press the COUNTER
RESET/EXIT button.
EJECT
CHANNEL
4
CLOCK/
COUNTER
COUNTER
3
MEMORY
F.FWD
PAUSE/STILL