Table of Contents
Advertisement
2.
PLAYBACK FUNCTIONS
1
Insert the cassette into the cassette slot.
display.
2
Playback: Press the playback button
3
Picture scanning: Press the
ward) button once or several times. You have a choice of
several picture scanning speeds.
4
Interrupt: Press the
STOP h
5
Wind and rewind: Interrupt the playback function with the
button and press the
STOP h
(wind) button.
If you want to carry out this function on your video
recorder, then turn the outer rotary control
or to the right. In the display appears:
If, during wind/rewind, you want to have a quick access to
picture scanning, use the 'Instant View' function.
6
Instant View: If you hold the
button during wind or rewind, you will switch to picture
scanning. If you release the button, the video recorder will
automatically switch back to rewind or wind again.
7
Eject a cassette: Interrupt the playback function with the
STOP h
button and press the
eo recorder.
Notes: Some functions switch off automatically after a while
(e.g.: pause, still picture, picture scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
8
v
appears in the
.
PLAY G
H
(reverse) or
I
(for-
button.
(rewind) or
H
I
o
to the left
0:20
H
(rewind) or
I
(wind)
EJECT J
button on the vid-
* The picture quality will deteriorate during picture scan-
ning. The sound is turned off.
* With this video recorder you can playback cassettes that
have been recorded on other video recorders in the NTSC
standard. This only works for PAL-television sets which are
suitable for a picture frequency of 60 Hz.
During NTSC-playback some special features (e.g. still
picture) are not possible.
Still picture/Slow motion
1
Press the
STILL R
button. A still picture appears on the
screen.
2
Each time you press
STILL R
on one step.
3
Hold the
STILL R
button. The picture will be played in
slow motion.
4
Press the
I
button several times. You have a choice of
several playback speeds. When you press the
ton several times you will return to the still picture.
There is no sound during slow motion playback.
Note: If the still picture vibrates vertically, hold the
1
the
P q
button at step
This setting will be stored automatically.
Please note, however, that interference may still occur with
poor quality cassettes.
Single frame picture/
picture search functions
1
Switch on the function by pressing the
on the video recorder. A still picture appears on the
screen.
2
Each time you press
STILL R
on one step.
3
Using the rotary control
picture search speeds.
again the picture will move
H
P r
until the vibration is minimal.
STILL R
button
again the picture will move
, you can select the various
o
but-
or
Hide quick links:
Advertisement
Table of Contents
