Table of Contents
Advertisement
Quick Links
Thank you for your purchase of the MCAudioLab EQ1ch Tube Equalizer.
IMPORTANT
Fill in the boxes above with voltage, model and your serial number to personalize your
unit . The informations and serial number can be found on the back of the product.
The serial number must be quoted in all comunication in order to obtain technical support
and spare parts.
Please register your new MCAudioLab product on "product registration" section in
www.mcaudiolab.com web site
TABLE OF CONTENTS
EQ1ch Tube Equalizer
2
2
3
4
4
5 - 6
7
8
1
MCAudioLab
Advertisement
Table of Contents
Related Manuals for MCAudioLab EQ1CH
Summary of Contents for MCAudioLab EQ1CH
- Page 1 Thank you for your purchase of the MCAudioLab EQ1ch Tube Equalizer. IMPORTANT Fill in the boxes above with voltage, model and your serial number to personalize your unit . The informations and serial number can be found on the back of the product.
- Page 2 The mid-high frequency (parametric) section with boost and “Q” control is based on LRC circuitry. The EQ1ch is a highly musical equalizer for a variety of program material from individual tracks to voices and instruments.
- Page 3 EQ1ch model layout EQ1ch Tube Equalizer MCAudioLab...
- Page 4 Height: Standard 3.50 inches or 2U rack space. Depth: 30 cm - 12.2 inches Weight: 5 kg - 13.2 lbs. TECHNICAL DATA - EQ1ch specifications Input line Impedance >10k Ohm Balanced XLR Output (line level); Recommended minimum load output Impedance 600 Ohm...
- Page 5 This toggle switch connects directly the input XLR socket to the output XLR one (pin to pin connection). The bypass switch act only if EQ1ch is powered on. When the bypass switch is on, the LED meter is on standby mode.
- Page 6 TP1ch uses a standard, detachable IEC power cord. Insert the AC power cord firmly into this socket. caution: please check to see what voltage your EQ1ch is set to. The voltage setting is marked on the serial badge on the rear panel. Make sure the voltage is properly set for your area before applying AC power to the unit.
- Page 7 EQ1ch signal flow schematic All XLR connectors are wired according to AES standard: pin 1 is ground (GND), pin 2 is “high” or “+,” and pin 3 is “low” or “-.” A positive voltage on pin 2 of the input will result in a positive voltage on pin 2 of the output (with the Phase Reverse switch set to Normal).
- Page 8 Warranty Repair If the EQ1ch should develop a problem during the warranty period, contact the factory to return shipping instructions. We will repair and return your MCAudioLab equipment quickly.
Need help?
Do you have a question about the EQ1CH and is the answer not in the manual?
Questions and answers