Creating A Ppp Dialup Connection On The Pc - Huawei EchoLife HG552a User Manual

EchoLife HG552a Home Gateway
User Guide
After you configure the HG552a, each user PC connected to the HG552a can dynamically
obtain an IP address according to the configuration of the upper-layer equipment or can be
installed with PPP dialer software to access the Internet.

5.3.3 Creating a PPP Dialup Connection on the PC

When the gateway is working in bridge mode, you need to install the PPP dialer software
on your PC so that your PC can dial-up to the Internet. If the operating system (OS)
installed on the PC is Windows XP, the PC can also dial up to the Internet through the
PPP dialer software provided by Windows XP. Take Windows XP as an example. To
create a dialup connection, do as follows:
Step 1
In the task bar, choose Start > All Programs > Accessories > Communications >
Network Connections.
Step 2
In the Network Tasks area, choose Create a new connection, and then click Next.
Step 3
Select Connect to the Internet, and then click Next.
Step 4
Select Set up my connection manually, and then click Next.
Step 5
Select Connect using a broadband connection that requires a user name and
password, and then click Next.
Step 6
Enter the name of the dialup connection (you can enter any name) in the ISP Name text
box, and then click Next.
Step 7
Select Anyone's use or My use only, and then click Next.
Step 8
Enter the user name and password provided by the service provider for dialing, and then
click Next.
Step 9
Select Add a shortcut to this connection to my desktop, and finally click Finish.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data Services
5-5