Related Manuals for Dustless D1603
Summary of Contents for Dustless D1603
- Page 1 OWNERS MANUAL D16 Series This appliance is intended for commercial and household use. dustlesstools.com PATENT NO. 5954863 & 5704956...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANTES MESURES DE SECURITE IMPORTANTE PARA SU SEGURIDAD SAVE THESE INSTRUCTIONS CONSERVER CES INSTRUCTIONS GUARDAR ESTAS INSTRUCCIONES NOTE: The reading and understanding of the Owner’s Manual is imperative prior to operating this machine. If you or your operator(s) cannot read English, have this manual explained fully before attempting to operate this machine. -
Page 3: Specific Safety Rules
TOOL USE AND CARE TOOL USE AND CARE cont • Always check the filters before each use. Do • In the event of operational malfunction the not use without a dust collection bag and vacuum must be shut down immediately. The filters in place. - Page 4 IN THE BOX D1603 16 GAL WET+DRY DUSTLESSVAC WITH 12 FT. HOSE: Extension Wands Outer Filter Inner Crevice Filter Floor Tool Tool WunderBag Barrel 10” Clamp 7” Clamp Shaker Basket Hose D1605 16 GAL WET+DRY VAC-FOREIGN: Outer Filter Extension Wands...
- Page 5 ChipBuddie DustBuddie HEPA Floor Tool Adapter 18” Hose 16250 SHERWIN WILLIAMS HEPA RRP KIT: HEPA Floor Tool Adapter 16500 DUSTLESS EPA LEAD SAFE COMPLIANCE: Dustie ChipBuddie HEPA Floor Tool 6’ Hose Adapter #32 Clamp Zip Tie D1607 HEPA - 240V 16 GAL WET+DRY VAC:...
- Page 6 SETUP WUNDERBAG INSTALLATION 1. Remove entire contents of box. 2. Slide legs into slots with the legs with the 1. Place the cardboard collar with the rubber hooks in the back. Screw in screws. gasket securely over the intake port on the inside of the barrel.
- Page 7 USAGE DRY PICKUP CLEAN FILTERS (HEPA WET+DRY) 1. Barrel should be emptied of any wet waste. 1. Turn the vacuum off and wait 5 seconds Filters can remain in place. after motor comes to a stop. Repeat 5 times. This allows weight to expand filter 2.
-
Page 8: Extension Cords
USAGE cont CHANGING WUNDERBAGS EXTENSION CORDS 1. Disconnect the vacuum from outlet. When using the appliance at a distance where an extension cord becomes necessary, a 2. Remove intermediate. 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating. -
Page 9: Maintenance
MAINTENANCE FILTER INSTALLATION (REGULAR WET+DRY) FILTER INSTALLATION (HEPA WET+DRY) 1. Place the HEPA filter over the crosspiece stud 1. Place the inner filter (small white filter) over and slide on the washer. Screw on the wing the filter support cage and attach with the nut to compress the washer and filter seal. -
Page 10: Recommended Replacement Intervals
MAINTENANCE SERVICE cont FILTER INSTALLATION (HEPA • Adjustments, servicing, and inspection WET+DRY) cont. work and inspection intervals specified in these Operating Instructions, as well as any 4. Place the filter-cleaning weight on the filter information on the replacement of parts and cover support, then place the HEPA filter systems of the vacuum must be undertaken cover over the HEPA filter cover support... -
Page 11: Warranty Card
• The HEPA filter does. guidelines for asbestos and mold removal? Why does the • The WunderBag must be used in line with a Dustless WunderBag say “do not HEPA vacuum to guarantee proper filtration. use for toxic materials including lead”? - Page 12 OTHER PRODUCTS AVAILABLE (not to scale) 5” Dustie Model #D1854 1-3/8” BitBuddie DustBuddie for 7-1/4” Worm Drive & Model #D1900 Hypoid Circular Saws Model #D4000 5” DustBuddie 7” DustBuddie Model #D1835 Model #D5850 HEPA Back Pack Model #15505 7” CutBuddie Model #D1750 Drywall Sander Model #50001...
Need help?
Do you have a question about the D1603 and is the answer not in the manual?
Questions and answers