Safety Instructions - AOpen WT10M-FRG User Manual

1. Safety Instructions

1. Please read these safety instructions carefully.
2. Please keep this User's Manual for reference.
3. Please disconnect this equipment from its power source before cleaning. Do not use liquid
or sprayed detergent for cleaning. Use a lightly moistened sheet or cloth for cleaning.
4. Make sure the equipment is connected to the power source with the correct voltage,
frequency and amperage.
5. All cautions and warnings on the equipment should be noted and followed.
6. Never pour any liquid into any opening of this equipment; this could cause fire or electrical
shock.
7. Never disassemble the equipment. For safety reasons, the equipment should only be
handled by qualified service personnel.
8. If one of the following situations arises, get the equipment checked by qualified service
personnel:
a. Liquid has penetrated the equipment.
b. The equipment has been exposed to moisture.
c. The equipment has not worked well or you cannot get it to work according to user's manual.
d. The equipment has been dropped and damaged.
e. The equipment has obvious signs of breakage.
9. Caution on use of battery: Use the battery recommended by the manufacturer or the same
type of battery installed by the manufacturer. If the incorrect battery is used, it may cause an
explosion or can present a fire hazard. Recycle or discard used batteries according the
manufacturer's instruction or your local authority.
10. Ambient operating temperature for this equipment is: 0~ 40 degrees Celsius. (32~104
degrees Fahrenheit)
11. Wall Mounting Holder needs to be an UL 1678 approved product.
9