Child Lock; Manual Channel Search; Troubleshooting; Before You Call An Engineer - Philips The Remote Control Operating Instructions Manual

Philips the remote control operating instructions
Table of Contents

Advertisement

Child lock

1
MENU
Press the
button.
2
Select and confirm the 'FEATURES' line.
3
Select the 'CHILD LOCK' line.
4
Switch the child lock on or off.
5
MENU
Press the
button.
Note: If a button is pressed with the childlock 'on',
'CHILD LOCK' appears for a few seconds in the display.
* Programmed recordings are made despite the child
lock and cannot be interrupted.

Manual channel search

In certain cases the Automatic Channel Search may not be
able to find all of the TV channels (e.g.: coded TV channels).
You can then use this manual method to set the channels.
1
Switch on the set with the
D
button and the
2
Select and confirm the 'MANUAL STORE' line.
MANUAL STORE
CHANNEL/FREQ.
SEARCH
FINE TUNING
PROGRAMME NR.
DECODER
STORE
3
Select the 'SEARCH' line.
C
4
Press the
button as often as necessary, until you
have found the right TV channel.
STOP h
button. Press the
C
button simultaniously.
v w
C-21
1
Note:
* If you want to allocate a decoder, switch the decoder
function on or off with the
'DECODER' line.
* If you want to change the automatic channel setting,
select the 'FINE TUNING' line.
D
C
With the
or
matic TV channel setting.
Important: This re-tuning is only necessary and useful in
special cases, e.g.: when there are stripes on the
picture with cable-TV systems.
5
In the 'PROGRAMME NR.' line use the
select the required programme number, e.g.: 'P 01' .
6
Select and confirm the 'STORE' line.
7
If you want to search for further TV channels, start again
4
at step
.
MENU
To finish, press the

Before you call an engineer

If, contrary to expectation, you experience any difficulty in
operating this TV Combi, please call the customer service in
your country.
You will find the telephone numbers in the enclosed guar-
antee leaflet.
The set does not respond to any button being pressed:
No power supply.
Technical disturbance: disconnect from the mains for 30
seconds, then re-connect.
The power switch on the side panel is switched off.
Child lock is active.
Cassette jammed:
Don't use force. Pull out the mains plug for a moment.
Remote control does not operate:
Remote control wasn't pointed at the set.
Batteries are exhausted.
No playback on TV Combi:
No recording on the cassette.
No TV reception:
The aerial is not connected.
No TV channels have been stored.
D
C
or
button in the
button you can vary the auto-
P p
button to
button twice.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

14pv182

Table of Contents