Lubrication - Echo SHC-2620 Operator's Manual

SHC-2620
Parts Required:
Note: Every unit is run at the
factory and the carburetor
is set in compliance with
emission regulations.
Carburetor adjustments,
other than idle speed,
must be performed by an
authorized ECHO dealer.
1. Check idle speed and reset if
necessary. If a tachometer is
available, idle speed screw (A)
should be set to the
specifications found on
"Specifications" page of this
manual. Turn idle screw (A)
clockwise to increase idle
speed; counterclockwise to
decrease idle speed.

Lubrication

Blades
Level 1.
Parts Required: 20W Engine Oil (blade lubrication), 50-50 mixture of
Hedge Trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
X7502342001
© 6/2017 ECHO Inc.
None
kerosene and 20W oil (blade cleaning)
MAINTENANCE
A
A
33