Selecting Albums And Tracks On Mp3-Cds; Programming Track Numbers; Locking All Buttons - Hold; Clearing The Program - Philips EXP311 User Manual

Selecting albums and tracks on MP3-CDs

Selecting an album during
playback
G
Briefly press or + once or several
times to skip to the first track of
the current, previous or subsequent
album.
➜
The first track of the selected album is played.
Selecting a track during playback
1
Keep or + pressed to skip quickly to previous
or subsequent MP3 tracks.
➜
Skipping starts and speeds up after 5 seconds.
2
Release the button at the desired track.
➜ Playback continues with the selected track.
Note:To skip from track to track at low speed,
use ∞ or §.
Storing the last position played – RESUME
You can store the last position played.When restarting,
playback will continue from where you have stopped.
1
Switch the slider to RESUME
during playback to activate RESUME.
➜ RESUME appears.
Press 9 whenever you want to
2
stop playback.
Press 2; to resume playback.
3
➜
Playback continues from where
you have stopped.
0 To deactivate RESUME, switch the slider to OFF.
➜ RESUME disappears.
Locking all buttons – HOLD
You can lock all buttons of the unit.When you press any
button, no action will take place.
G
Switch the slider to HOLD to activate HOLD.
appears and HOLD is displayed. All buttons are
➜ RESUME
locked.When pressing any button, HOLD is displayed.
0
To deactivate HOLD, switch the slider to OFF.
➜ RESUME
disappears.

Programming track numbers

You can select up to 50 tracks and store them in the
memory in a desired sequence.You can store any track
more than once.
Select a track with ∞, §, or +.
1
2
Press PROGRAM to store the
track.
➜ PROGRAM
the number of stored tracks is
displayed.
3
Select and store all desired tracks
in this way.
If necessary press 9 to stop
4
normal playback. Press 2; to start
playback of the program.
0 To add additional tracks to the program, stop playback of
the program by pressing 9 and continue with step 1.
0
To review the program, keep PROGRAM pressed for more
than 3 seconds.
➜ All stored tracks are displayed in sequence.

Clearing the program

If necessary press 9 to stop playback.
1
Press 9 to clear the program.
2
PROGRAM CLEARED is
➜
scrolled,
and the program is cleared.
O F F • R
ES U M E •
HO LD
Notes:
The program will also be cleared if you interrupt the power
supply or open the CD compartment or if the unit switches off
automatically.
After storing 50 tracks, PROGRAM FULL is scrolled.
Belt clip
1
Align the belt clip as indicated in
the illustration and press on the
clip to insert its shaped pin into
the hole in the unit.
2
Turn the clip clockwise as
indicated to lock the belt clip to
the unit.
0
To detach, gently lift the belt clip where LIFT is indicated
and turn it counter-clockwise.
appears and P with
disappears
PROGRAM
1
2