Connecting Devices Via Bluetooth; Using The Touchpad; Turning The Headset On And Off - Samsung Level On Pro EO-PN920 Quick Start Manual

Turning the headset on and off

•
: ON
•
: OFF
•
: Bluetooth pairing mode
Connecting devices via the NFC feature
1. Activate the NFC feature on your other device.
2. Turn on the headset and place the other device's NFC antenna
near the NFC antenna area (
The devices will be connected when the other device accepts
the Bluetooth connection request.

Connecting devices via Bluetooth

1. Slide the Power switch upwards and hold it for approximately
three seconds to enter Bluetooth pairing mode.
The notification light will flash red, green, and blue.
2. On your other device, activate the Bluetooth feature and
tap Samsung Level On Pro (0000) from the list of available
devices.

Using the touchpad

When devices are connected via Bluetooth, use the touchpad
on the right side of the headset to adjust the volume or control
the playback. You can also tap and hold the touchpad for more
than 1.5 seconds to hear the ambient noise around you and the
connected device's audio simultaneously. For more information,
refer to the user manual.
•
Use only one finger on the touchpad.
•
The touchpad cannot be used while the headset is
connected to another device via an audio cable.
4
) of the headset.
► 1