Kia Forte Owner's Manual page 541

If the headlight aiming adjustment is
necessary after the
assembly is reinstalled, consult an
authorized Kia dealer.
Front side marker/Front turn sig-
headlight
nal light
1. Open the hood.
2. Disconnect the negative battery
cable.
3. Loosen the retaining bolts and
remove the headlamp assembly
from the body of the vehicle. If you
can reach to the bulb without
removing the headlamp assembly,
you don't need to do step 3.
4. Disconnect the power connec
tor(s) from the back of the head
lamp assembly.
Front side marker
5. Remove the socket from the
OYDDMC2043
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6. Pull the bulb out of the socket.
7. Insert a new bulb.
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into assembly
and turn the socket clockwise.
9. Reinstall the headlamp assembly,
bumper to the body of the vehicle.
Maintenance
OYDM076073
7 79