System Malfunction - Kia Forte Owner's Manual

Hide thumbs Also See for Forte:
Table of Contents

Advertisement

Driving your vehicle
✽ ✽ NOTICE
• Do not install any accessories, such
as a license plate bracket or
bumper sticker near the sensor
area. Do not replace the bumper
by yourself. Doing so may adverse-
ly affect the sensing performance.
• Always keep the sensor/bumper
area clean.
• Use only a soft cloth to wash the
vehicle. Also, do not spray highly
pressurized water on the sensor
installed on the bumper.
• Be careful not to apply unneces-
sary force on the frontal sensor
area. When the sensor moves out
of the correct position due to
external force, the system may not
operate correctly even without the
warning light or message. In this
case, we recommend you to have
the vehicle inspected by an
authorized Kia dealer.
• Use only the genuine Kia sensor
cover. Do not arbitrarily apply
paint on the sensor cover.
5
50

System malfunction

• When the AEB is not working prop-
erly, the AEB warning light (
illuminate and the warning mes-
sage ("Check AEB system") will
appear for a few seconds. After the
message disappears, the master
warning light (
) will illuminate. In
this case, we recommend you to
have the vehicle inspected by an
authorized Kia dealer.
• The AEB warning message may
appear along with the illumination
of the ESC warning light.
WARNING
The AEB is only a supplemental
) will
system for the driver's conven-
ience.
The
driver
responsibility to control the
vehicle. Do not solely depend
on the AEB system. Rather,
maintain a safe braking dis-
tance,
and,
depress the brake pedal to
lower the driving speed.
still
maintains
if
necessary,

Advertisement

Table of Contents
loading

Table of Contents