Caution
• When in assembly, put the plate of the Cloth between the
Frame and the Leg cover.
26. Remove eight Hoses and eight Anchor clips, and remove
the Air bags.
9.15. Removing the Massage mecha-
nism block
1. Proceed all the procedures of 9.6. Removing the Rear
cover.
2. Push the Lower button of the Controller, and move the
Massage mechanism block to the lowest position.
3. Remove four screws, and remove the Massage block
cover.
4. Remove the Fixing screw for the Connecting cord for
power source and the Ground wire, and remove three
Connectors.
5. Cut the Cable tie T30R, and remove the Connecting cord
for power source from the Massage block cover clip.
6. Remove four screws each on right/left sides, and remove
Rail piece sets (right/left sides).
55