Dodge Ram Commercial2016 Owner's Manual page 337

Safety & Driving Assistance
After pressing the "Safety & Driving Assistance" button
on the touchscreen the following settings will be avail-
able.
• ParkSense
The Rear Park Assist system will scan for objects behind
the vehicle when the transmission shift lever is in RE-
VERSE and the vehicle speed is less than 11 mph
(18 km/h). The system can be enabled with Sound Only
or Sound and Display. To change the Park Assist status,
select the "Sound Only" or the "Sound and Display"
button on the touchscreen. Refer to "ParkSense Rear Park
Assist" in "Understanding The Features Of Your Vehicle"
for system function and operating information.
• Front ParkSense Chime Volume
The Front ParkSense Chime Volume settings can be
selected from the EVIC/DID or Uconnect System — if
UNDERSTANDING YOUR INSTRUMENT PANEL 335
equipped. The chime volume settings include LOW,
MEDIUM, and HIGH. The factory default volume setting
is MEDIUM. To change the mode status, press the "Front
ParkSense Volume" button and select the "Low" "Med"
or "High" buttons on the touchscreen. ParkSense will
retain its last known configuration state through ignition
cycles.
• Rear ParkSense Chime Volume
The Rear ParkSense Chime Volume settings can be se-
lected from the EVIC/DID or Uconnect System — if
equipped. The chime volume settings include LOW,
MEDIUM, and HIGH. The factory default volume setting
is MEDIUM. To change the mode status, press the "Rear
ParkSense Volume" button and select the "Low" "Med"
or "High" buttons on the touchscreen. ParkSense will
retain its last known configuration state through ignition
cycles.
4