Advertisement
BALL 'O FIRE
ASSEMBLY INSTRUCTIONS:
13MM bolt
Hexnut
WARNING!
!
DO NOT USE WITHOUT FIREBOWL,
THE FIREBOWL MUST BE USED AT
ALL TIMES. KEEP FIREWOOD
WITHIN THE BOUNDARIES OF THE
FIREBOWL. DO NOT PILE WOOD ON
ANY SCREEN PART. FIREWOOD
MUST NOT BE ALLOWED TO TOUCH
ANY PART OF THE SCREEN. FOR
LONGER PRODUCT LIFE, KEEP
FIRES TO A RESPECTABLE SIZE,
DO NOT OVERLOAD.
™
STEP 10
Assemble the fixed
screen sections
[E,F,G] to the center
ring using (2) 13MM
bolts and hexnuts.
Tighten securely.
STEP 11
Assemble the bowl
handles [N] to the
bowl [O] using (4)
hexnuts. Tighten
securely.
STEP 12
Assemble door
screen section
[H,J,K] to the pivot
pins as shown.
Squeeze the ends
of the door together
if necessary and
insert into the pins.
Assemble the door
with (2) 40MM bolts,
flat washers, lock
washers and
hexnuts. Assemble
as shown.
Place the firebowl
on the inside and
onto the 25MM
bolts.
The Ball 'O Fire is
ready for use.
Enjoy!
HELPFUL HINTS
• ADDING SAND TO THE BOTTOM OF
FIREBOWL HELPS PROTECT AGAINST
THE CORROSIVE NATURE OF THE ASHES
AND WILL EXTEND THE LIFE OF
THE FIREBOWL.
• IF YOU ARE NOT GOING TO USE THE
BALL 'O FIRE FOR A LONG PERIOD
OF TIME, STORE AWAY OUT OF THE
WEATHER OR USE THE COVER TO KEEP
DRY.
• DO NOT LET FIREBOWL FILL WITH
WATER.
• DO NOT DUMP ASHES WHERE THEY
COULD START A FIRE.
• DISPOSE OF ASHES IN PROPER
RECEPTACLE ONLY AFTER ASHES HAVE
COOLED.
DO NOT RETURN PRODUCT TO
THE STORE. IF YOU HAVE
QUESTIONS OR TROUBLE
WITH ASSEMBLY, PLEASE
CALL 1-877-347-4557
FOR ASSISTANCE.
Hexnut
Lock washer
Flat washer
PAGE 4
40MM bolt
Advertisement
