Canon PowerShot SX520 HS User Manual page 76

ç Contents
●
A face may not be displayed at a constant size at some zoom
factors, or if the subject's head is tilted or facing the camera
indirectly.
●
During movie recording, a changed zoom factor and camera
operating sounds are recorded.
●
When Auto is on, some shooting information is not displayed,
and some shooting settings cannot be configured.
●
If the person whose face is framed with [
edge of the screen, the camera zooms out to keep the person in
view.
●
In step 3, switching [
possible during movie recording.
●
The zoom factor remains the same after you press the shutter
button all the way down in self-timer mode ( = 79), even if the
person's size relative to the screen changes.
The face size can also be adjusted in MENU ( = 52) > [
●
tab > [ Auto Settings] > [
to deactivate this feature and use only the feature described in
"Easily Reacquiring Subjects with Auto Zooming (Seek Assist)".
●
You can zoom in or out with the zoom lever when [Face], [Upper
Body], or [Whole Body] is selected, but the original zoom factor
will be restored in a few seconds after you release the lever.
● You can clear your specified face size during movie recording by
pressing the [
●
Face sizes cannot be changed during movie recording.
] to another face with the [
Auto Zoom]. You can choose [Off]
] button.
] moves toward the
] button is not
]
76