Start-Up - ROHS Currenza C2 Technical Documentation Manual

START-UP

To avoid damage of any kind during the start-up process,
please carefully check all points specified below:
– suitable connection cable for the respective
interface
– mains voltage in conformity with the specification
on the label
Proceed as follows to install the coin changer in the vending machine:
1
Pull the mains plug of the vending machine.
2
Hang up the coin changer in the vending machine using the three
fastening holes in the rear wall (two at the top and one at the
bottom), see figure below.
6
National Rejectors, Inc. GmbH, Buxtehude