Name Of Part - NEC DS1-MP10RX1 Important Information Manual

Multipresenter stick
Hide thumbs Also See for DS1-MP10RX1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

4. Name of Part

① HDMI connector
Connect to the HDMI input terminal on a display or a projector via the supplied
HDMI extension cable.
② Power button
Execute powering ON /OFF.
Hold to press (approx. 5 seconds) for powering OFF.
③ ⑨ Exhaust vent
Exhaust hot air from the device.
Note: Do not obstruct air flow from the exhaust vents.
④ DC IN terminal
Connect the supplied AC adapter.
Note: Ensure the terminal direction for connecting the AC adapter to this product.
⑤ USB port
Connect a USB mouse (commercially available) for setting this product.
⑥ Security hanger
Fix on a commercially available security wire.
⑦ Power Indicator
Indicate the Power status.
Power ON: Light on in blue
Power OFF: Light off
⑧ Strap hole
Put on a commercially available strap, etc. for fastening this product.
Note: Do not use a conductive item such as a wire. It may cause to deteriorate the wire-
less LAN sensitivity.
⑩ microSD card slot
* This does not work on this product. Do not remove the cover.
ENG-8

Advertisement

Chapters

Table of Contents
loading

Table of Contents