NEC DS1-MP10RX1 Important Information Manual page 21

Multipresenter stick
Hide thumbs Also See for DS1-MP10RX1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
DETAIL SETTINGS (SMART CONNECTION)
Item
PIN TYPE
- ONE-TIME
The PIN CODE is automatically created every time
stopping to access to the network.
- STATIC
Set up random number for the PIN CODE.
SECURITY TYPE
Select this when [ONE-TIME] is set for PIN TYPE.
- SIMPLE
Consists of 8 digits number which is two times
repetition of the PIN CODE.
- RANDOM
Automatically create eight digits security key.
SECURITY KEY
Set this when [STATIC] is selected for PIN TYPE.
PIN CODE
Set this when [STATIC] is selected for PIN TYPE.
CHANNEL
Select a wireless channel.
DETAIL SETTINGS (INFRASTRUCTURE)
Item
SITE SURVEY
• Run the site survey and display the detected ac-
cess points.
• The maximum of 64 access points can be dis-
played.
• Only one access point with the same name as SSID
is displayed.
• The applicable access points are the securitydis-
abled WPA-PSK, WPA2- PSK.
• A " Key" mark is attached when the security setting
of the access point has been enabled.
SECURITY SETTING
Select security type.
- [DISABLE]
Disable the security setting.
- WPA2-PSK
Input column for the security key is displayed.
- WPA/WPA2-PSK
Input column for the security key is displayed.
SSID
Set the SSID
Description
Description
ENG-11
Remarks
- The default factory setting Is [ONE-
TIME].
- Consists of 8 to 63 alphanumeric char-
acters.
- Four numbers
- The default factory setting is "6".
Remarks
Note: If any access point is not detected,
select [SITE SURVEY] again after selecting
[RECONNECT] on the WIRELESS LAN SET-
TING screen.
- The default factory setting is [DISABLE].
- The security key consists of 8 to 63
alphanumeric characters.
- The default factory setting is "NECDS".
- SSID consists of 1 to 32 alphanumeric
characters.

Advertisement

Chapters

Table of Contents
loading

Table of Contents