Advertisement
Maintenance
1. Avoid dropping, slamming, or throwing the unit.
2. Avoid extreme temperatures. Do not expose unit directly under sunshine.
3. When cleaning the unit, use a soft fabric and lightly wipe with mild detergent.
Use a damp cloth to remove dirt and excess detergent.
Speci cations
Product Description
Arm-type Fully Automatic Digital Blood Pressure Monitor
BSP-11
Model
Display
LCD Digital Display
Measurement Method
Oscillometric Method
Pressure
Measurement Range
Pulse
Pressure
Measurement Accuracy
Pulse
Pressurization
Automatic Pressurization
Memory
120 Memories
Low Battery Detection
Function
Automatic Power-Off
4 AAA batteries or Medical AC Aadapter(DC6.0V, 600mA)
Power Source
(recommended, not provided)
Battery Life
Approximately 2 m
Unit Weight
Approx.360g (12.7oz.) (excluding battery)
Approx.140 x 98 x 48mm (5.51
Unit Dimensions
Cuff Circumference
Approx.135 (W)×485(L) mm
(Medium cuff: Fits arm circumference 22-36 cm)
Temperature
Operating Environment
Humidity
Pressure
Size: 62.7mm×46.4mm (2.47" x 1.83")
0mmHg～300mmHg
30 to 180 Beats/Minute
±3mmHg
±5%
onths
at 3 tests per day
"
x 3.86
"
x 1.89
"
)(L x W x H)
1
~ 40
(50 ~104 )
℉
℉
0℃
℃
15% ~90%RH
Atmospheric Pressure
21
Maintenance
4.
Cuff Cleaning:
Do not soak cuff in water!
a soft cloth to clean cuff's surface. Use a damp cloth (water-based) to wipe clean.
Allow cuff to dry naturally at room temperature.
5.
Do not use petrol, thinners or similar solvents.
6. Remove batteries when not in operation for an extended period of time.
7. Do not disassemble product.
8. It is recommended the performance should be checked every 2 years.
9. Expected service life: Approximately three years at 10 tests per day.
23
Speci cations
Temperature:
Storage Environment
Humidity
Ingress Protection Rating:
IP 22
Internal Powered Equipment,Type BF
Classification:
Specifications are subject to change without notice.
This Blood Pressure Monitor complies with the European regulations .This blood
pressure monitor also complies with mainly following standards
(included but not limited):
Safety standard:
EN 60601-1 Medical electrical equipment part 1: General requirements for safety
EMC standard:
EN 60601-1-2 Medical electrical equipment part 1-2: General requirements for
safety- Collateral standard: Electromagnetic compatibility- Requirements and tests
Performance standards:
EN 1060-1 Non-invasive sphygmomanometers - General requirements
EN 1060-3 Non-invasive sphygmomanometers - Supplementary requirements for
electromechanical blood pressure measuring systems.
EN 1060-4 Non-invasive sphygmomanometers - Test procedures to determine the overall
system accuracy of automated non-invasive sphygmomanometers.
C or r ect D isposal of T his P r oduct
(Waste Electrical & Electronic Equipment)
This marking shown on the product indicates that it should not be disposed with other
household waste at the end of its life. To prevent potential harm to the environment or to
human health, please separate this product from other types of wastes and recycle it
responsibly. When disposing this type of product, contact the retailer where product was
purchased or contact your local government office for details regarding how this item can
be disposed in an environmentally safe recycling center.
Business users should contact their supplier and check the terms and conditions of the
purchasing agreement. This product should not be mixed with other commercial wastes
for disposal. This product is free of hazardous materials.
Apply a small amount of rubbing alcohol to
-20 ~55
(-4
℉
~131
℉
)
℃
℃
15% ~90%RH
,Cuff is the Applied Part
22
24
Advertisement
