Timer Recording - Philips MC132DMG Owner's Manual

MC132DMG/MC192DMG 3/22/02

32 Timer Recording

Follow the steps below to program the TV/VCR to record
TV programs while you're away from home. The TV/VCR
will turn itself on, record, and turn itself off automatically.
Before you begin, make sure:
The clock is set. If not, CLOCK MUST BE SET appears,
followed by the SET CLOCK menu. Details are on pages
12-17.
Channels are set. Details are on page 10.
A tape is in the TV/VCR. Make sure the tape's record tab
is intact and the tape is long enough to record the pro-
gram.
Complete each step within 60 seconds of completing
the previous step. If you don't, you may start again
at step 1.
1
Press the MENU button.
PRIM. SETUP
>
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/
ton to select VCR PROGRAM, then press the
F.FWD/B button.
VCR PROGRAM
> ONCE
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/
ton to select a ONCE, DAILY, OR WEEKLY
recording. Then, press the F.FWD/B button.
ONCE: The TV/VCR will record a TV program on
any day you choose, up to 12 months away.
DAILY: The TV/VCR will record every day from
Monday to Friday – starting at the same time and
recording the same channel for the same length of
time.
WEEKLY: The TV/VCR will record the same
channel on the same day, at the same time, and for
the same length of time every week.
Daily
Recording
(example)
1:21 PM Page 32
PRESS
B
button or the STOP/
button or the STOP/
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
SELECT PROGRAM NUMBER
TO END PRESS EXIT
POWER
1
REW
1
4
7
SPEED
REC/OTR
but-
but-
Helpful Hints
• With ShowGuard, you don't have
to worry about losing your timer
recordings. If the power fails,
timer recordings will be restored
when the clock is reset. (The
clock will reset itself automatical-
ly if you are using AUTO CLOCK.
Details are on pages 14-17. If
you are not using AUTO CLOCK,
reset the clock manually. Details
are on pages 12-13.) The timer
recording will not occur only if it
was scheduled to take place dur-
ing the power failure.
• You cannot set a timer recording
if DEFEAT RECORDING is ON.
Details are on page 36.
2-3
SLEEP/WAKE UP
PLAY
F.FWD
STOP
STATUS/EXIT
2 3
CH.
5 6
8 9
0
ALT.CH
VOL.
MEMORY PAUSE/STILL
MUTE
TRACKING