Dukane 9005 User Manual
  1. Manuals
  2. Brands
  3. Dukane Manuals
  4. Projector
  5. 9005
  6. User manual

Dukane 9005 User Manual

Hide thumbs Also See for 9005:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Projector
9005/9006W/9007WU
User's Manual (detailed)
Operating Guide – Technical
Example of computer signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 768
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1440 x 900
(continued on next page)
430-9005/ 9006W / 9007WU -Tech-00
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
47.7
49.7
60.0
64.0
80.0
55.9
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.1
VESA
74.5
60.0
VESA
70.1
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
59.9
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
W-XGA (60Hz)
1280 x 800 (60Hz)
1280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
WXGA+ (60Hz)
1

Advertisement

Table of Contents
loading

Related Manuals for Dukane 9005

Summary of Contents for Dukane 9005

  • Page 1 60.0 60.0 VESA 1280 x 960 (60Hz) 1280 x 1024 64.0 60.0 VESA SXGA (60Hz) 1280 x 1024 80.0 75.0 VESA SXGA (75Hz) 1440 x 900 55.9 59.9 VESA WXGA+ (60Hz) (continued on next page) 430-9005/ 9006W / 9007WU -Tech-00...
  • Page 2 Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode *1 1280 x 1024 91.1 85.0 VESA SXGA (85Hz) *2 1400 x 1050 65.2 60.0 VESA SXGA+ (60Hz) *3 1680 x 1050 65.3 60.0 VESA WSXGA+ (60Hz)
  • Page 3 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)

  • Page 4: Monitor Out

    Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. ►Only the signal that is input from the COMPUTER IN1 or IN2 can be output from the MONITOR OUT port.
  • Page 5 Connection to the ports (continued) COMPUTER IN2 R/Cr/Pr, G/Y, B/Cb/Pb, BNC jack x5 <Computer signal> • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL level <Component video signal> •...
  • Page 6 Connection to the ports (continued) DVI-D DVI-D jack (digital to digital) Signal Signal Signal T.M.D.S. Data2 - T.M.D.S. Data1 - 17 T.M.D.S. Data0 - T.M.D.S. Data2 + 10 T.M.D.S. Data1 + 18 T.M.D.S. Data0 + T.M.D.S. Data2/4 Shield 11 T.M.D.S. Data1/3 Shield 19 T.M.D.S.
  • Page 7 Connection to the ports (continued) CONTROL ① ② ③ ④ ⑤ ⑨ ⑧ ⑦ ⑥ D-sub 9pin plug ⑥ ⑦ ⑧ ⑨ ⑤ ④ ③ ② ① * About the details of RS-232C communication, please refer to the next section. Signal Signal Signal...
  • Page 8 Connection to the ports (continued) HDBaseT RJ-45 jack ② ④ ⑥ ⑧ ⑧ ⑥ ④ ② ⑦ ⑤ ③ ① ① ③ ⑤ ⑦ Signal Signal Signal HDBaseT0+ HDBaseT2+ HDBaseT3+ HDBaseT0- HDBaseT2- HDBaseT3- HDBaseT1+ HDBaseT1- RJ-45 jack ⑧ ⑥ ④ ②...
  • Page 9 Connection to the ports (continued) WIRELESS PORT ④ ③ ② ① Only for USB wireless adapter. ① ② ③ ④ Signal - Data + Data Ground REMOTE CONTROL Ø3.5 stereo mini jack...
  • Page 10 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&19). Connection Turn off the projector and the computer.

  • Page 11: Communication Settings

    RS-232C Communication (continued) Communication settings 1. Protocol 19200bps, 8N1 2. Command format ("h" shows hexadecimal) Byte Number Command Header Data Header Data Setting Action Type code size flag code Packet Action <SET>Change setting to desired value [(cL)(cH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(bL)(bH)].

  • Page 12: Response Code / Error Code

    RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply: 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the specified item by [Type], and it returns the code. (2) NAK reply: 15h When the projector cannot understand the received command, the projector returns the error code.
  • Page 13 Command Control via the Network Command Control via the Network When the projector connects to the network, the projector can be controlled with RS-232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&19).

  • Page 14: Communication Port

    Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Configure the following items from a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Control Port1 (Port: 23)] to use TCP #23.

  • Page 15: Command Control Settings

    Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format Same as RS-232C communication, refer to RS-232C Communication command format. 2. Response code / Error code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4).
  • Page 16 Command Control via the Network (continued) 2. Response code / Error code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is the same as the sending command format. (1) ACK reply: 06h + ××h (××h : connection ID) (2) NAK reply: 15h + ××h...
  • Page 17 Network Bridge Communication Network Bridge Communication This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by wired or wireless LAN communication, an external device that is connected with this projector by RS- 232C communication can be controlled from the computer as a network terminal. For details, see the 7.

  • Page 18: Service Menu

    Network Bridge Communication Communication settings For communication setting, use the COMMUNICATION menu in the OPTION - SERVICE menu. Item Condition BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (fixed) PARITY NONE/ODD/EVEN Start bit 1 bit (fixed) Stop bit 1 bit (fixed) Transmission method...
  • Page 19 RS-232C Communication / Network command table RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
  • Page 20 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code LENS MEMORY BE EF 06 00 A0 91 02 00 0D 24 00 00 LENS SHIFT - V LENS MEMORY BE EF 06 00 E4 91 02 00 0E 24...

  • Page 21: Secondary Source

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code TOP LEFT BE EF 06 00 02 23 01 00 01 23 00 00 TOP RIGHT BE EF 06 00 92 22 01 00 01 23 01 00 PinP POSITION...
  • Page 22 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 FD D3 02 00 04 20 00 00 CONTRAST Increment BE EF 06 00 9B D3 04 00 04 20 00 00 Decrement BE EF...
  • Page 23 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 08 FE 02 00 90 30 00 00 User GAMMA Increment BE EF 06 00 6E FE 04 00 90 30 00 00 Point 1...

  • Page 24: Color Temp

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code 1 HIGH BE EF 06 00 0B F5 01 00 B0 30 03 00 1 CUSTOM BE EF 06 00 CB F8 01 00 B0 30 13 00 2 MID-1...
  • Page 25 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code COLOR Reset Execute BE EF 06 00 80 D0 06 00 0A 70 00 00 BE EF 06 00 49 73 02 00 03 22 00 00 TINT...

  • Page 26: Auto Adjust Execute

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 0D 83 02 00 00 21 00 00 V POSITION Increment BE EF 06 00 6B 83 04 00 00 21 00 00 Decrement...
  • Page 27 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code AUTO BE EF 06 00 62 74 01 00 19 22 00 00 VIDEO BE EF 06 00 F2 75 01 00 19 22 01 00 DVI-D FORMAT COMPUTER...
  • Page 28 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code KEYSTONE BE EF 06 00 6B 8C 01 00 30 31 01 00 PERFECT FIT BE EF 06 00 9B 8C 01 00 30 31 02 00 GEOMETRIC...
  • Page 29 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 31 97 02 00 41 21 00 00 PERFECT FIT Increment BE EF 06 00 57 97 04 00 41 21 00 00 Left Side...

  • Page 30: Edge Blending

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 A8 8F 02 00 38 31 00 00 EDGE Increment BE EF 06 00 CE 8F 04 00 38 31 00 00 BLENDING LEFT TOP H...
  • Page 31 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 D0 94 02 00 4A 31 00 00 EDGE Increment BE EF 06 00 B6 94 04 00 4A 31 00 00 BLENDING Decrement...

  • Page 32: Installation

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code NORMAL BE EF 06 00 3B 23 01 00 00 33 00 00 ECO MODE BE EF 06 00 AB 22 01 00 00 33 01 00 BE EF...
  • Page 33 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF...
  • Page 34 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 40 D7 02 00 16 30 00 00 MENU Increment BE EF 06 00 26 D7 04 00 16 30 00 00 POSITION V Decrement...
  • Page 35 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 3B EF 01 00 C0 30 00 00 MyScreen Lock BE EF 06 00 AB EE 01 00 C0 30 01 00 BE EF 06 00...

  • Page 36: Auto Power Off

    RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code NORMAL BE EF 06 00 BA 78 01 00 23 22 00 00 SOURCE SKIP - SKIP BE EF 06 00 2A 79 01 00 23 22 01 00...
  • Page 37 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code MY IMAGE BE EF 06 00 5A 3D 01 00 00 36 16 00 MESSENGER BE EF 06 00 AA 29 01 00 00 36 25 00 INFORMATION...
  • Page 38 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code MY IMAGE BE EF 06 00 E2 3C 01 00 02 36 16 00 MESSENGER BE EF 06 00 12 28 01 00 02 36 25 00 INFORMATION...
  • Page 39 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 FF 32 01 00 00 26 00 00 REMOTE BE EF 06 00 6F 33 01 00 00 26 01 00 RECEIV.
  • Page 40 PJLink command PJLink command Commands Control Description Parameter or Response 0 = Standby POWR Power Control 1 = Power On 0 = Standby 1 = Power On POWR ? Power Status inquiry 2 = Cool Down 11 = COMPUTER IN1 12 = COMPUTER IN2 23 = VIDEO 31 = HDMI 1...
  • Page 41 2900 Dukane Drive St Charles, IL 60174 St Charles, IL 60174 St Charles, IL 60174 800-676-2487 / 630-762-4032 800-676-2487 / 630-762-4032 800-676-2487 / 630-762-4032 Fax 630-584-5156 Fax 630-584-5156 Fax 630-584-5156 avservice@dukane.com avservice@dukane.com avservice@dukane.com www.dukane.com/av www.dukane.com/av www.dukane.com/av 430-9005/ 9006W / 9007WU -Tech-00...

This manual is also suitable for:

9007wu9006w

Table of Contents