Installation; Electrical Connection; Motor Unit Features - SEMAK VB200 Operation And Warranty Booklet

INSTALLATION

Installation must be carried out in strict compliance with the provisions of law currently in force in
Australia or country of use, with particular reference to said country's accident and fire-prevention
requirements and electricity authority regulations.
Unpack the machine completely and check that all the parts are in perfect condition. Before using it
for the first time, verify the following points:

5.1. ELECTRICAL CONNECTION

 Electrical outlet required is a 10 A single phase and standardised plug.
 Protect the installation with a differential circuit breaker and a 10 A fuse.
 Check that the voltage of the main supply corresponds to that indicated on the rating plate of
the machine.

5.2. MOTOR UNIT FEATURES

 The motor unit belongs to the Class II (Double Isolation).
 The motor is universal type, AC supply, single phase, provided with a thermal protector and does
not need to be earthed.
 This machine is provided with a 2 meters long PVC isolation cord and a 10 A plug.
Page | 5