Operation Instruction; General Instructions; Control Button - AOC T16 Service Manual

3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the Signal cable from the monitor to the VGA card.
• Press the power button to turn on the monitor position. The power indicator will light up.
3.2 Control Buttons
FRONT PANEL CONTROL
• Power Button /Power Indicator:
Press this button to switch ON/OFF of monitor's power.
Blue — Power On mode.
Orange — Power saving mode.
• MENU / ENTER:
Active OSD menu or function adjust confirm or Exit OSD menu when in volume OSD status.
•
- /ECO:
Activates the ECO control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust
a function when function is activated.
1. Auto Config / Exit
2. -/ ECO
3. +/ Image Ratio
4. MENU / ENTER
5. Power Button
6