Beko D5 Service Manual page 9

There are two ways to access the
SETUP menu:
Press the blue Setup button or Press
the TV Menu button and use the
Program ▼ button to select SETUP.
Press the OK button to enter the
SETUP menu.
Please note
The system will displayed automatically on
SYSTEM row i.e.BG, L, I, DK depending the
receiving broadcasting system of the country.
In some countries the broadcasting system can
be both in BG/DK or BG/LL´. Only the TV sets
produced with Pal Secam BG/DK or Pal
Secam BG/LL´ systems can receive both
BG/DK or BG/LL´ broadcasts. In this case the
user can select the required SYSTEM using
buttons.
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
a) If you don't know the channel number
(tuning with search function)
In the Setup menu select PROG
NUMBER and change to 01 using the
Program ▼ button to select it and the
button to change it.
Starting with Program 01, tune in the
first channel as follow.
Use the Program ▼ button to select
SEARCH.
Press the
tuning search.
The search arrow will flash and the
tuning indicator will move upthe scale.
When the search finds a strong
channel signal it will stop searching.
The picture will appear.
or button to start the
Identify which channel you are watching (BBC
1, ITV 1 etc.) and decide which program
number you want it to be.
Use the Program ▼ button to select
PROGRAM NUMBER.
Use the / buttons to select the
program number.
Use the Program ▼ button to select
Store. Press the OK button and
STORED will appear on the STORE
line.
You have now stored the first channel.
Use the Program ▲ button to select
again SEARCH and continue the
tuning procedure until you have tuned
in all the programmes you want or the
television can receive.
b) If you know the channel number
(tuning with channel numbers)
Press the OK button to enter the
CHANNEL row.
Use the Program ▼/▲ buttons to
select "S" for cable channels and "C"
or terrestrial broadcast.
Use
number
Enter the channel number using the
Numeric or
Press the OK button to exit the
channel row.
Use the Program ▼ button to select
PROGRAM NUMBER.
Use the
program number.
Use the Program ▼ button to select
STORE. Press the OK button and
STORED will appear on the STORE
line.
You have now stored the first
channel.
Use the Program ▲ button to select
again SEARCH and continue the
tuning procedure until you have tuned
in all the programmes you want or the
television can receive.
- 9 -
button to select the channel
buttons.
buttons to select the