Table of Contents
Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable
for recycling.
Help to protect the
environment, take the packaging to the local amenity tip and
Composite
place into the appropriate recycling bin.
6" Dual Action
Sander
07211
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE
CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY
ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-
Please read and fully understand the in-
group.com
www.sip-group.com
structions in this manual before operation.
Keep this manual safe for future reference
Ref: 090913
16
1
Advertisement
Table of Contents
Related Manuals for Aeropro 07211
Summary of Contents for Aeropro 07211
- Page 1 Composite place into the appropriate recycling bin. 6” Dual Action Sander 07211 FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip- Please read and fully understand the in- group.com...
-
Page 2: Declaration Of Conformity
LE12 9NH England As the manufacturer's authorised representative within the EC declare that the Composite 6” Dual Action Sander - SIP Part. No. 07211 Conforms to the requirements of the following directive(s), as indicated. 2006/42/EC Machinery Directive And the relevant harmonised standard(s) Signed: …………………………………... - Page 3 PARTS LIST CONTENTS Ref. No. Description SIP Part No. Ref. No. Description SIP Part No. 6” Sanding pad AI05-00041 Housing AI05-00475 Drive spindle AI05-00044 Housing grip AI05-00476 Retainer ring AI05-00042 AI05-00056 Wave washer AI05-00043 O-ring AI05-00057 Bearing AI05-00045 Rear handle cover AI05-00477 Bolt AI05-00046...
- Page 4 SAFETY INSTRUCTIONS EXPLODED DRAWING IMPORTANT: Please read the following instructions carefully, failure to do so could lead to serious personal injury and / or damage to the sander. When using your sander, basic safety precautions should always be followed to re- duce the risk of personal injury and / or damage to it.
- Page 5 TROUBLESHOOTING SAFETY INSTRUCTIONS….cont ulators, hoses, isolation valves and connection devices MUST be suitable for the in- The following form lists the common operating issues with problems and solutions. tended application correctly installed and maintained in good condition by a com- Please read the form carefully and follow it.
- Page 6 SAFETY INSTRUCTIONS….cont OPERATING INSTRUCTIONS….cont OPERATING THE SANDER We recommend wearing a face mask or respiratory equipment when Once the sanding pad is fitted and secure: using any air tool; particularly during drilling, sanding, grinding, sawing or other operations likely to cause airborne particles. Connect the drill to the air supply via the air inlet (5).
- Page 7 OPERATING INSTRUCTIONS….cont GETTING TO KNOW YOUR COMPOSITE AIR SANDER LUBRICATION An automatic in-line filter-regulator-lubricator is recommended (Fig.1) as it in- creases tool life and keeps the tool in sustained operation. The in-line lubricator should be regularly checked and filled with air tool oil. Proper adjustment of the in-line lubricator is performed by placing a sheet of paper next to the exhaust ports and holding the throttle open approximately 30 seconds.
- Page 8 OPERATING INSTRUCTIONS DESCRIPTION This 6” dual action sander is designed with a durable lightweight composite housing. It SIP Part No. 07211 has a built in air regulator for precise control. It is the ergonomic choice for sanding Disc Ø 6” (152.4mm) operations.
Need help?
Do you have a question about the 07211 and is the answer not in the manual?
Questions and answers