Automatic Channel Setup - Philips/Magnavox CCA194AT Owner's Manual

10 Automatic Channel Setup

Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
1
Press the COMBI button, then press the MENU button.
PRESS
> PRIM. SETUP
B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/ button or the STOP/
PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
SELECT LANGUAGE
>
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/ button or the STOP/
AUTO PROGRAMMING, then press the F.FWD/B but-
ton. AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable chan-
nels automatically, and the TV/VCR will memorize its available
4
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number placed in the TV/VCR's memory will
appear on the screen. Now, when you press the CH(annel) m/n
button, you will scan only through channels you receive.
1
button to select
button to select
4
• Line Input mode will always be
2-3
EJECT
POWER
SLEEP/WAKE UP SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
A.CH
VOL.
CABLE/DBS COMBI
VCR PLUS+
VAR.SLOW /ENTER MUTE
TRACKING F.ADV SLOW
SMART SKIP INDEX
PICTURE SEARCH SEARCH
Wait for the TV/VCR to set up
channels.
Helpful Hint
stored in the TV/VCR's memory as
channel 00. You cannot delete it.