Configuring Local Area Network - D-Link DIR-825/AC Quick Installation Manual

Wireless ac1200 dual band gigabit router with 3g/lte support and usb port

Hide thumbs Also See for DIR-825/AC:

Table of Contents

DIR-825/AC

Configuring Local Area Network

Go to the Connections Setup / LAN page.

If needed, change the IPv4 address of the router's LAN interface and the

mask of the local subnet. To do this, click the IPv4 tab and specify

needed values in the IP Address and Subnet mask fields in the IP

section.

If needed, specify your own IPv6 address of the router's LAN interface.

To do this, click the IPv6 tab and select the Static value from the

Addressing Mode drop-down list in the IP section. Then specify the

needed value in the IP address field.

Quick Installation Guide

Table of Contents

Show Quick Links

Table of Contents